nerves alternatives and similar packages
Based on the "Embedded Systems" category.
Alternatively, view nerves alternatives based on common mentions on social networks and blogs.
Do you think we are missing an alternative of nerves or a related project?
Nerves System BR provides the common logic for building Nerves Systems using Buildroot. If you're new to Nerves, you probably don't want to look at this repository. Please check out the official documentation.
For examples of using
nerves_system_br, take a look at the officially
supported hardware systems:
- Raspberry Pi Zero
- Raspberry Pi Zero, A+, B and B+
- Raspberry Pi 2 Model B
- Raspberry Pi 3 Model B and B+
- Raspberry Pi 3 Model A+
- Raspberry Pi 4 Model B
- Generic x86_64
We only officially support easily obtained hardware, but that doesn't mean that Nerves only works on these boards. If it's possible to use Buildroot to create a Linux root filesystem for your hardware, then it's possible that Nerves can be made to run. The general steps to supporting a new board are the following:
- Create a minimal Buildroot
defconfigthat boots and runs on the board. This doesn't use Nerves at all.
- If the
defconfigrequires a writable root filesystem, figure out how to make it read-only. This should be pretty easy unless you're using
systemd. Since Nerves uses a custom init system, keep in mind for later that
systemdmay be helping initialize something on the board that will need to be done manually later.
- Take a look at the Flash memory layout and compare that to the layouts used
in one of the supported systems. We use
fwup to create images. There's a lot of
variety in how one can lay out Flash memory and deal with things like
failbacks. At this point, just see if you can get
fwupto create an image.
- Clone one of the official systems that seems close for your board. Update
nerves_defconfigbased on the Buildroot
- Build the system using
mixor manually by running the
Non-mix way of using Nerves
It is highly recommended that all users follow the official documentation on using systems. However, advanced users have found the information to be helpful, so it hasn't been deleted. This ONLY works on Linux.
After you have manually built Nerves, activate it before running any Elixir or Erlang build tools on your application.
In the above line, substitute
build for whatever directory was used to build
the Nerve System. If you downloaded a pre-built Nerves System, source the
nerves-env.sh inside of it. When using a rebuilt system, the crosscompiler
toolchain must also be downloaded. See the
toolchains project. As stated
before, the Nerves
mix integration takes care of this for you.
This step has to be done each time you launch a shell. The key environment
settings updated by the script are the
PATH variable and a set of variables
that direct build tools such as
relx, and other
invoke the cross-compiler.
Enabling a native library or application
Buildroot comes with support for a zillion C libraries and applications. Nerves enables the minimum number of packages to keep the base system image small. Examples of packages that you may want to add are things like graphics and UI frameworks, command line utilities, databases, and file system utilities. To browse available packages, go to your build directory and run:
If you can't find a package, try typing
/ to search for it. After you have
enabled a package, save your changes and exit menuconfig. The changes are saved
.config file in your build directory. To save them to your system's
nerves_defconfig file, run
Enabling an application or library is only part of the process to getting it to
work. If that package needs to write to the filesystem, it may need to be
configured to write to
/root or another location since Nerves keeps the root
filesystem readonly. This is done on purpose to avoid corrupting the root
Be aware that Buildroot caches the root filesystem between builds and that when you deselect a configuration option, it will not disappear from the Nerves root file system image until a clean build.
Enabling a Linux kernel driver
If you have a piece of hardware that requires a special Linux driver that isn't enabled by default, run:
This will let you config kernel options. When done, save and exit. Like before,
the configuration is saved to your build directory. To make the change
Enabling simple commandline utilities
If you're looking for many standard commandline utilities like
cat(1), etc., they'll be in a package called Busybox. Nerves disables most of
them since it uses the Erlang, Elixir, or LFE shells. To enable more of them,
Just like the other configuration menus, when you exit menuconfig, the options
will only be stored in your build directory. To make them permanent, save the
build/busybox-*/.config) to your configuration directory. You
will need to run
make menuconfig to update the location of the Busybox